HotShieldUSA

hs-2hs-2 flame

 

The Hot Shield Wildland Face Protector Mask is designed by firefighters for wildland firefighting. This HS-2 model is a multiple layer, carbon fiber fabric face mask designed to provide two (2) major benefits/protections; primarily heat/flame & burning embers protection to major portions of the face & neck, and secondarily, a measure of respiratory  relief. It is made of CarbonX fabric, a material that withstands over 2000 degrees Fahrenheit and has an integral filter pocket that accepts any low-level N-95 particulate respirator filter. The mask fastens at the neck and can hang below the face until ready to deploy. Designed for intermittent use as needed. Wash & wear. Inexpensive filter replacement.  Reflective trim for nighttime visibility. One size fits all.

 

topps

 Model CO76

Wildland Coveralls

Fabric:
6.0 oz. per square yard DuPont NOMEX® aramid or 9.0 oz. per square yard INDURA® Ultra Soft®wld-coverall_lg
  • heavy-duty, two-way brass zipper
  • reinforced nickel plated brass snaps covered on the inside
  • pleated bi-swing back with elasticized waistband
  • right breast pocket with full flap, with hook and loop closure
  • radio pocket on left chest with full hook and loop closure
  • two hip pockets with flaps and hook and loop closures
  • no metal exposed to skin
  • sewn throughout with NOMEX® thread
  • 10″ leg zippers
  • leg gusset gives protection even with leg zippers open

Please note, in order to be compliant with NFPA 1977, these garments fit much more loosely than standard Topps garments. We recommend utilizing try-on garments to ensure the correct fit.

 

 

wld-jacket_lgModel JK12

Jacket

Fabric:
6.0 oz. per square yard DuPont NOMEX® aramid or 9.0 oz. per square yard INDURA® Ultra Soft®
  • long style to ensure adequate interface with pants
  • radio pocket on left front with hook and loop flap closure
  • bellowed breast pocket with hook and loop flap closure
  • two bellowed lower pockets with hook and loop flap closure
  • hook and loop closure on sleeve cuffs
  • large collar with throat piece with hook and loop closure
  • heavy-duty zipper with NOMEX® zipper tape
  • hook and loop closure tabs on front to conceal zipper

Please note, in order to be compliant with NFPA 1977, these garments fit much more loosely than standard Topps garments. We recommend utilizing try-on garments to ensure the correct fit.

Model PA12wld-PA12pnt_lg

Pants

Fabric:
6.0 oz. per square yard DuPont NOMEX® aramid or 9.0 oz. per square yard INDURA® Ultra Soft®
  • waist adjustable with hook and loop take up tabs
  • outseams and seat seam are reinforced by double topstitching entire length
  • two bellowed cargo pockets with hook and loop closures on flaps
  • waistband closes with heavy-duty snap
  • hook and loop take up tabs on leg bottoms
  • two patch hip pockets with flaps and hook and loop closure
  • bottoms of side pockets are reinforced using an “X” bartack
  • sewn throughout with NOMEX® thread
  • self-locking brass zipper with NOMEX® zipper tape

Please note, in order to be compliant with NFPA 1977, these garments fit much more loosely than standard Topps garments. We recommend utilizing try-on garments to ensure the correct fit.

Majestic-Logo-Vectorized

Leather Gloves

15091509

  • 1509A Grade leather
  • Keystone Thumb
  • Leather rolled hem prevents side seam blowout
  • Double sewn index finger seam
  • Leather strap for snug fit

 

scotty

4000-BRAVO Backpack System

ScottyBRAVOBackpackThe Scotty 4000-BRAVO Backpack is designed to be a simple, portable reservoir for water and/or foam concentrate (Class A orClass B). It provides the wearer with a safe and comfortable way to carry liquids used during fire operations. The backpack system consists of an outer shell with a removable innner bladder. The outer shell is made in a high-visibility yellow, ballistic nylon fabric and is extremely durable and UV resistant. The BRAVO comes with an ultra comfortable shoulder harness system. It uses high strength nylon webbing for the fully adjustable shoulder, sternum and waist straps. The high-visibility yellow colour allows the Scotty Backpack to stand out through smoke and foliage. Each backpack has a 4″ wide filled port with lid and a standard ¾” garden hose thread for an outlet.

 

4000-BP Forestry Water Pump and Backpack 4000-BP

• Includes Hand Pump, 5 gallon (19 L) Backpack, 4 foot Pick-up Hose and
pressure nozzle.

• Single action pump with a brass inner chamber and piston.

• Incorporates easy to pump “Duckbill” checkvalve system.

• Outer sleeve made of super tough, engineering-grade polymer making it
durable and lightweight.

• No tools required for in-the-field disassembly for maintenance.

• Includes 4 foot pick-up hose with Quick Connect Shut-Off and Pump
Service Kit (4000SERVDB).

 

4000F-BP4000F-BP

• All the components and features of the 4000-BP Hand Pump & Backpack
(above) with the addition of a foam eductor and air-aspirating nozzle (4003).

• The 4000F-BP eliminates the need to batch mix when Class A foam
is required.

• Each time pump draws water, foam concentrate is educted at 1% into the
pump chamber.

• The 4003 air-aspirating nozzle generates foam when the pump is
discharged.

• Includes 4 foot Pick-up Hose with Quick Connect Shut-Off and Pump Service
Kit (4000SERV-DB).

tft

BUBBLE CUP

DS1024BCP

  •  The BubbleCup and QuadraCup are TFT exclusives designed specifically for water and foam applications with Class A and AFFF foam in a single nozzle, no attachments necessary.
  • The BubbleCup and QuadraCup are ideally suited to work with eductors, on-board foam proportioning systems, or even batch mixed foam solutions and can easily move from aspirated foam to a wide protective fog pattern.
  • The BubbleCup and QuadraCup offer models specifically for break-and-extend operations, or with an integrated stainless steel ball shutoff and TFT’s unique “quick change” rear valve seat as well as color coded handle and pistol grip.